![]() Connectors, lights and packaging are identical, so I just copied the callout graphics below from the C8 review. If it weren’t for the product number on the label on the back, you couldn’t tell them apart. You could easily mistake the C9 for its AC1750 class Archer C8 sibling we reviewed a few months ago. But TP-LINK AC1900 is here now, so let’s see what it brings to the party. It’s quite late to market, given that the first of its competition introduced AC1900 routers well over a year ago and followed up with AC2350 and AC3200 products last summer. Note: End-device means laptops, smartphones, etc.With the Archer C9, TP-LINK finally has released its first AC1900 class router. Please contact TP-Link support and provide the IP address and Default Gateway that you’ve found. Use the default gateway address to log in if you have changed the IP address of the TP-Link device.Ĭ. Check the IP address and Default Gateway obtained on the end-device (click here). If you only have one end-device, like a computer, attempt to restart the computer or clear DNS cache on the computer (click here).ī. Try different web browsers and end-devices. If it’s a wireless router, disconnect the modem from the router if it’s a range extender, connect one end-device to it via wireless.Ī. ![]() DO NOT connect any other devices like modem or server because those may have an impact on the running of web-based management server of the TP-Link or your end-device. ![]() Simplify network topology by connecting only one end-device to the TP-Link device. Usually, there is a reset button/hole on the TP-Link device, push it for a few seconds can factory reset it. Note: If there is no internet at all, or if you don’t mind losing all your configuration, please reset the device. A simple restart by pushing the power off and on the button will not bring any harm. Or you can refer: What can I do if I forget the login password of TP-Link Wireless Router? However, if the default credential cannot work, reset the TP-Link device into default settings by pressing the reset button for 10s if you have forgotten the customized username and password. The default username and password are both admin in lower case. If you can access TP-Link login address correctly using the domain name or IP address, but fail to log in using login username and password. Make sure you type the domain name or IP address in the address bar instead of the search bar. Log in to the Web-based Interface through the default domain name or default IP Address, which can be found on the installation guide. If the LAN/Ethernet LED is not lit with Ethernet cable from the end-device plugged in the TP-Link, try different Ethernet ports and cables. Refer to Quick Installation Guide to check the physical connection between your end-device and the TP-Link if you are using an Ethernet connection to visit the interface of TP-Link. Chances are that you cannot log in to its interface at the initial setup or after the configuration even though you can access the internet.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |